Install your Brother printer using any device.
Learn the steps in our step-by-step tutorial
1
Unpack and Prepare the Printer
- Get rid of all packaging and other protective material
- Make sure you connect the power cord, then switch on the printer.
- Install the ink or toner cartridges in accordance with the directions.
⚠️ Important
Make sure all packing and tape material is removed prior to turning on the printer.
2
Load Paper
- Remove the paper tray
- Make sure the paper guides be in line with the size of the paper
- Incorporate the paper, then secure the tray
3
Install Brother iPrint&Scan App or Software
- Download the Brother iPrint&Scan App or complete software bundle from the official site
- Download the application on your mobile or computer device.
- Check that your device is on the same wireless network that the printer is connected to.
📱 Download Links
It is available on App Store and Google Play, and Brother's Support website.
4
Connect the Printer to Wi-Fi
- Hit the Menu button on the printer
- Navigate to Network > WLAN > Setup Wizard
- Select the Wi-Fi network you want to connect to and create a password.
5
Alternative Connection Methods
🔒 Wi-Fi Protected Setup (WPS)
- Click the WPS button on the router. Press the WPS button.
- On the printer, hold the Wi-Fi icon until the wireless LED turns on.
- The printer will connect automatically
🔌 Ethernet Connection
- Attach to an Ethernet cable from your printer to the router.
- The printer will connect automatically and get an IP address.
🔗 USB Connection
- Connect your device to your computer with the USB cable
- If you are prompted to install drivers, utilize the Brother installation software
6
Reset Network Settings (If Needed)
- Hit the Menu button to the printer
- Go to Network > Network Reset
- Reset the device to restore the factory network settings
🔧 Troubleshooting
You can use this method if you're experiencing issues with connection or you need to start the setup process again.
🎉 Setup Complete!