Configure your HP printer using any device.
Follow our step by step guide
1
Unpack and Prepare the Printer
- Take all packaging materials off the printer
- Connect the power cable and switch on the printer.
- Install the cartridge toner as according to the directions provided
⚠️ Important
Make sure all tapes and packaging materials are removed prior to turning on.
2
Load Paper
- Unlock the paper input tray
- Make sure that the paper guides match the size of the paper
- Place the paper in the tray, then close it.
3
Install the HP Smart App
- Install and download HP Smart, the HP Smart app on your smartphone or computer
- Make sure you have connected your gadget to the Wi-Fi network you want to connect your printer to.
📱 Download Links
Available through the App Store and Google Play, and HP's official site for desktop versions.
4
Connect the Printer to Wi-Fi Using HP Smart
- Open the HP Smart app
- Tap the plus sign (+) to add a new printer
- Follow the instructions on-screen to connect your printer to the Wi-Fi network.
5
Alternative Connection Methods
🔒 Wi-Fi Protected Setup (WPS)
- Press the WPS button on your router
- Within two minutes after that, press and hold down on the Wireless buttons on the printer till the Wireless light begins blinking.
- The printer will connect automatically to the network
🔌 Ethernet Connection
- Attach with an Ethernet cable from your printer to the router.
- The printer will instantly obtain an IP address, and then connect to the network.
🔗 USB Connection
- Connect to your computer using a USB cable from your device to the computer
- Follow the steps within HP Smart app. Follow the instructions in HP Smart app to complete the installation
6
Restore Network Settings (If Needed)
- Click and hold on the Information button for 3 seconds.
- Click and hold both the Wireless and Cancel buttons at the same time until the printer starts to restart.
- The wireless light will flash and indicate that the printer is set up
🔧 Troubleshooting
This method is only recommended in the event of connection problems or if you need to reset your network settings.
🎉 Setup Complete!